
21
Installing the Motherboard
Connecting I/O Devices
The backplane of the motherboard has the following I/O ports:
LAN1 Port Connect an RJ-45 jack to the LAN port to connect your
computer to the network.
VGA1 Port Connect your monitor to the VGA port.
HDMI Port Connect the HDMI port to the HDMI devices.
USB Ports Use the USB ports to connect USB devices.
ESATA1 Port Use this port to connect to an external SATA box or a
Serial ATA port multiplier.
It is suggested that users use the eSATA hard disk with
external power.
J4 Connect a DC-in jack to J4.
Optical SPDIF
Output
This jack connects to external optical digital audio output
devices.
Audio Ports Use the audio jacks to connect audio devices. The C port is
for stereo line-in signal, while the E port is for microphone
in signal. This motherboard supports audio devices that cor-
respond to the A, B and D port respectively. In addition, all
of the 3 ports, B, and D provide users with both right & left
channels individually. Users please refer to the following
note for specific port function definition.
The above port definition can be changed to audio input or
audio output by changing the driver utility setting.
A : Center & Woofer D : Front Out
B : Back Surround E : Mic_in Rear
C : Line-in
-
Kommentare zu diesen Handbüchern